EASY AIS CLASS B with GPS
EASY Class B, transmit and receive AIS system including gps antenna.
When connected to a suitable vhf antenna or through your existing antenna with the Easy splitter and with the gps antenna connected the set will transmit your AIS details automatically.
Set comes with programming disc and only requires your mmsi number, name of vessel and vessel details to be entered.
Set can be wired to an external on off switch to either transmit your data or not as the case may be
The easyTRX Transmits and receives AIS radio signals. The received signals are proceeded into an NMEA Signal which can be interpreted from the latest chartplotter or a PC software.
The easyTRX transmits your vessel dynamic and static data, so that you can be seen by other AIS receiver users.
Package Contents:
EasyTRX Class B CS Transceiver, Cable 1,2m to connect to the chart plotter or to the PC and to the board power. Detailed English and German manual for the unit and a separate manual for the software. Software to configure and monitor the easyTRX on the PC. Dedicated GPS antenna.
Note when comparing prices, check the GPS antenna is included as the unit will not work without it!
AIS Class B CS transceiver with latest Micro Processor technology
•Fully certified through official authorities
•Silent mode capable with external on off switch - not included. Receive only in this mode.
•PC Software for configuration, but also to display AIS information on the PC, included
•AIS Transceiver with integrated GPS receiver
•1 transmitter, 2 receivers (One receiver is changing between AIS and DSC channel)
•Sensitivity: -107dBm
•Baudrate: 38.4kB, bi-directional
•NMEA protocol: VDM •GPS receiver according IEC 61108
•VHF Antenna connector: 50Ohm, SO239 •GPS Antenna connector: 50Ohm, TNC
•Power supply: 9.6VDC-15,6VDC
•Power consumption: 4W in transfer mode
•Ambient conditions: splash proof according IP67, -25°C to 55°C
•198mm (l) x 158mm (b) x 47mm (h), •Weight: 375gr
